Calibration

Validation and adjustment services for measuring devices and metering solutions

From standard factory calibrations and special calibrations for custody transfer to extensive adjustments of measurement parameters
Certified KROHNE calibration facilities with many years of calibration experience
Test documentation with calibration certificates
Accredited calibrations available on request

At a glance

Calibration service for flow, level, pressure and temperature
Comprehensive calibration portfolio from standard calibrations and functional tests to customised and witnessed calibrations to extensive device adjustments
With over 150 KROHNE calibration facilities for every measured variable and every device type
Our calibration equipment is traceable to national and international standards (ISO 9001); accredited calibrations can also be carried out (in accordance with ISO 17025, UKAS, RVA; DAkkS etc.)
Calibration carried out by experienced and regularly trained calibration engineers to ensure quality and continuity
Special solution-related calibration services for metering systems, metering control systems, wet gas systems, sampling and analyser systems, provers, master meter and leak detection systems

Your challenge

KROHNE products are designed to work reliably under real process conditions and to deliver long-term stable measurement results for many years. However, international or national standards, demanding process or environmental conditions and improper use may make it necessary to calibrate and, if required, adjust instrumentation in certified facilities after installation.

Our service

KROHNE offers a comprehensive portfolio of calibration service options tailored to customer requirements to ensure that our measuring devices always work according to specifications. This includes:

Standard factory calibrations against reference instruments
Special calibrations for custody transfer measurements and fiscal metering in accordance with MID, OIML, AGA and other standards
Calibrations with adjustment of the function-preserving metrological constants
Calibrations with a complete parameter adjustment

Thanks to our many years of experience, calibration is now one of our core competences. Thanks to a worldwide network of more than 150 calibration facilities, we are able to calibrate every device we manufacture. These calibration systems are among the most accurate used in the manufacture of process instrumentation worldwide. They are certified or accredited according to international standards.

Upon request, we offer accredited calibrations for increased requirements in accordance with
ISO 17025 or other standards in KROHNE's own or external calibration laboratories. Our calibration service includes both individual measuring devices and complex measurement and control systems. The accredited facilities are subject to regular testing by metrology institutes. In addition to factory and laboratory calibration, KROHNE also offers mobile calibration as a premium service.

Your added value

Long-term stable, reliable and accurate measured values
Increased performance and product service lifetime thanks to recommended calibration intervals and parameter settings
Facilitate the sustainable and cost- efficient use of measuring devices by extending the product life cycle
KROHNE gives you access to many years of calibration expertise with worldwide availability
Benefit from the most accurate calibration equipment available in the manufacture of process instrumentation worldwide
High calibration reliability thanks to the use of leading-edge calibration technology
Everything from a single source: just one contact for comprehensive calibration services

Service options

Calibration only

For each standard calibration, KROHNE compares the field device with a higher reference in certified calibration facilities. For example, flowmeters at KROHNE are always calibrated with a calibration medium, usually water or air. The measuring performance of the customer device is checked and deviations from the reference instrument are documented.

Our service at a glance

The measuring device to be tested is calibrated against a reference
No adjustments are made to the meter under test
A calibration certificate is issued to prove that the calibration has been carried out and the results obtained (as found)

Calibration with metrological verification

KROHNE offers calibrations with metrological verification according to a defined specification for measurements that are subject to calibration or billing. These can be based on the requirements of MID, OIML, AGA or other national and international standards. KROHNE uses certified calibration facilities to check whether the approved measuring device complies with the maximum permissible measurement error and is therefore within the predefined specification. KROHNE then issues a test certificate for the mandatory recalibration. In addition, KROHNE also offers accredited calibrations in accordance with ISO 17025 (RvA, UKAS, DAkkS) and others from a single source.

Our service at a glance

Calibration in accordance with predefined specifications
Confirmation that requirements of standards (MID, OIML, API, AGA etc.) are fulfilled/complied with; accredited calibrations according to ISO 17025 (RvA, UKAS, DAkkS) and other standards can also be carried out
Compliance is confirmed with a verification certificate
Specific conditions are taken into account while calibrating (e.g. stipulated measuring ranges and accuracies)

Calibration with adjustment of all parameters

In addition to calibration with adjustment of the essential device constants, KROHNE also offers calibration that includes complete adjustment of non-metrological device parameters. Depending on customer requirements, the adjustment ranges from customer-specific troubleshooting and optimisation, e.g. changing the signal/frequency output, to a complete reset of the measuring device to factory settings. With this calibration service, KROHNE can also carry out all settings on the meter under test that offer the customer added value against a specific application background.

Our service at a glance

The measuring device under test is calibrated against a reference
In the event of measurement deviations outside the specification, not only are the basic metrological device constants adjusted, but non-metrological parameters are also adjusted according to customer requirements
The calibration is performed again to confirm that the parameter adjustments were successful and that the meter under test is now operating within the specifications
Two calibration certificates are issued: one certificate covering the performance and results of the calibration before adjustment ("as found") and a second certificate covering the performance and results of the calibration after adjustment ("as left")

Services for solutions

System calibration & validation for metering systems

Additional diagnostics and monitoring to achieve optimal performance of the system

KROHNE certified validation with full audit trail
On-site or laboratory calibration of instruments
Adjustments according to application requirements
Uncertainty calculations with all parties involved
Periodical inspection, including environmental and metrological certification

View service details

System calibration & validation for metering control systems

KROHNE certified validation with full audit trail

Additional diagnostics and monitoring to achieve full performance of the system
Verification of the correct firmware and software versions and parameter settings
Alarm and error log review
Periodical inspection, including environmental and metrological certification

View service details

System calibration & validation for wet gas and wellhead flow measurement

Achieving full performance in the field with reliable measurements

Optimisation of the system according to application requirements
Remote technical assistance by KROHNE experts
Test plans and comparison of results
Intuitive input of fluid properties for wet gas measurement systems
Field validation of measurement performance

View service details

Calibration & validation for sampling and analyser systems

Performance verification and additional diagnostics

KROHNE certified validation system
On-site or laboratory calibration of instruments
Adjustments of the systems according to application requirements
Monitoring and verification to confirm full performance of the system

View service details

System calibration & validation for provers and master meters

Periodic verification and re-calibrations

KROHNE certified validation with full audit trail
On-site or laboratory calibration of instruments
Adjustments according to application requirements
Uncertainty calculations with all parties involved
Periodical inspection, including environmental and metrological certification

View service details

System calibration & validation for pipeline management

Optimisation to operating conditions and achieving full performance

Calibration of pipeline protection and monitoring systems
Adjustments according to the application requirements to increase sensitivity and enable the accurate identification of pipeline incidents
System validation according to effectiveness and certification

View service details